Pengaruh Desain Modular Terhadap Stabilitas Suhu dan Reduksi Kebisingan pada Incu Analyzer 452 296
DOI:
https://doi.org/10.26623/transformatika.v23i2.12330Keywords:
Incu Analyzer, Inkubator Bayi, Sensor Suhu, Sensor Tingkat Kebisingan, Kesalahan NilaiAbstract
Incu analyzer is a tool used to measure temperature, airflow noise and humidity. The way the tool works during calibration is placed on a mattress. The temperature sensor used is an LM35 sensor that produces a linear voltage value with temperature. The output voltage is proportional to the temperature in degrees Celsius. The noise level sensor uses a sound sensor microphone module, which is an electronic module that functions to detect sound and convert it into an electrical signal. This Sound Mic Microphone Sensor Detection Module for Arduino has a sound detection range of ± 30 cm to 1 meter. When testing the 35°C setting, the error percentage was 7%, the 36°C setting obtained a 3% error percentage and the 37°C setting obtained a 3% error percentage. The noise level sensor test data was carried out 9 times at 5 minute intervals. And the average error value was 1.2 (dB), and the overall error value was 0.92 (dB).
Downloads
References
Y. S. Nafie, J. Tarigan, A. Ch Louk, and K. Kunci, RANCANG BANGUN SISTEM KONTROL PARAMETER FISIK PADA INKUBATOR BAYI BERBASIS MIKROKONTROLER ARDUINO UNO DAN ESP 8266.
E. Arianto and A. Siswoyo, Analisis Tingkat Penyebaran Suhu Inkubator Bayi Dengan Sensor DS18B20, J-Innovation, vol. 11, no. 2, pp. 39–43, Dec. 2022, doi: 10.55600/jipwa.v11i2.144.
A. Taqwa et al., Monitoring Temperature Bayi Dengan Sistem Wireless Sensor Network Berbasis Arduino Uno ATmega328.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 fajri prasojo
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Transformatika is licensed under a Creative Commons Attribution 4.0 International License.
