Redesain Jembatan Bulakan - Serenan dengan Rangka Baja di Kabupaten Sukoharjo
DOI:
https://doi.org/10.26623/ijces.v1i1.10759Keywords:
Bridge, Infrastructure, Structural Conditions, Traffic Data, Warren Truss TypeAbstract
The Bulakan – Serenan Bridge, located in Sukoharjo Regency, Central Java, serves as a key infrastructure connecting Juwiring District in Klaten Regency with Sukoharjo District in Sukoharjo Regency. With increasing traffic volume, the bridge's safety and capacity have become primary concerns in this study. The research aims to redesign the bridge with a Warren truss type to enhance its capacity to accommodate the growing traffic demand while ensuring safety and comfort. The bridge load planning is carried out based on SNI 1725 (2016) and SNI 2833 (2016) standards, complemented by additional bridge regulations such as RSNI T-03-2005, the Bridge Management System, and Practical Guide for Bridge Engineering Design. Structural analysis is performed using ETABS Version 14 software. Traffic data and the planned structural conditions are analyzed to assess the impact of increased traffic volume on the bridge's structural strength.
References
Asiyanto. (2005). Metode Konstruksi Jembatan Rangka Baja. Jakarta: Universitas Indonesia.
Azizah, M. (2018). Modifikasi Desain Struktur Jembatan Klampok STA 8+857 Proyek Jalan Tol Pasuruan - Probolingg, Jawa Timur Dengan Struktur Baja Komposit. Skripsi Program Studi D3 Teknik Sipil.
Badan Standardisasi Nasional. (2005). RSNI T-03-2005-Perencanaan Struktur Baja untuk jembatan. Jakarta: BSN.
Badan Standardisasi Nasional. (2013). SNI 7971:2013-Struktur Baja Canai Dingin. Jakarta: BSN.
Badan Standardisasi Nasional. (2016). SNI 1725:2016-Pembebanan untuk Jembatan. Jakarta: BSN.
Badan Standardisasi Nasional. (2016). SNI 2833:2020-Perencanaan Jembatan terhadap beban gempa. Jakarta: BSN.
Ir. H. J. Struyk, & Veen, P. (2021). Jembatan. (Soemargono, Trans.) Jakarta: PT. Sapdodadi.
Irawan, H., Purnomo, D., & Muhrozi. (2016). Perencanaan Pelebaran Jembatan Jatingaleh Kota Semarang. Jurnal Karya Teknik Sipil, 6(1), 93-103.
Kementrian Pekerjaan Umum dan Perumahan Rakyat. (1992). Bridge Management System (BMS). Jakarta: Kementrian Pekerjaan Umum dan Perumahan Rakyat.
Kementrian Pekerjaan Umum dan Perumahan Rakyat. (2021). Panduan Praktis Perencanaan Teknis Jembatan. Jakarta: Kementrian Pekerjaan Umum dan Perumahan Rakyat.
Kementrian Pekerjaan Umum dan Perumahan Rakyat. (Buku Saku Petunjuk Konstruksi Jembatan). 2022. Jakarta: Kementrian Pekerjaan Umum dan Perumahan Rakyat.
Lunner, T., Robertson, P., & Powell, J. (1997). Cone Penetration Testing. London: CRC Press.
Setiawan, A. (2008). Perencanaan Struktur Baja Dengan Metode LRFD. Jakarta: Erlangga.
Surya, M. (2014). Perencanaan Abutment dan Sistem Perkuatan Oprit Jembatan Damas, Trernggalek, Jawa Timur. Skripsi Jurusan Teknik Sipil.
Yahya, I. (2023). Redesign Struktur Jembatan Kabupaten Magelang Menggunakan Baja Tipe Warren Truss. Skripsi Program Studi Teknik Sipil.
Yoga, M. (2022). Perencanaan Jembatan Kedungjati Menggunakan Struktur Atas Rangka Baja Tipe Warren. Skripsi Program Studi Teknik Sipil.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Indonesian Journal of Civil Engineering Study
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
