Perancangan Portable Continuous Passive Motion (CPM) sebagai Alat Bantu Rehabilitasi Fraktur Lutut Pasca Operasi Berbasis Internet of Things (IoT)

Warsat Resti Arbi Nugroho, Syaiful Ari Hangga Hidayah, Rizki Nugraheni Budi Widodo, Adila Eka Saputri, Fatkurohman Nanda Prambudi, Ifnu Agus Riyanto, I Wayan Angga Wijaya Kusuma

Abstract


One of the steps needed in patients with fractures of the knee joint is therapeutic exercises guided by physiotherapists. Therapeutic exercise is a physiotherapy modality by moving the joints both actively and passively. Inspired by this, the Portable Continuous Passive Motion (CPM) tool was created which is a physiotherapy aid for patients after surgery or knee surgery. Portable Continuous Passive Motion (CPM) has been developed based on IoT. Portable Continuous Passive Motion (CPM) uses Arduino LoRa as a micro controller, a stepper motor as a driver and uses a software application as a controller. The form of this research is research and development. From the results of the development, it can be concluded that Portable Continuous Passive Motion (CPM) can be useful for postoperative fracture patients as a practical and flexible postoperative manual therapy tool.


Keywords


Fracture Rehabilitation, IoT, Arduino LoRa, Manual Therapy

Full Text:

PDF

References


Kementerian Kesehatan RI Badan Penelitian dan

Pengembangan, Hasil Utama Riset Kesehatan

Dasar, Kementrian Kesehat. Republik Indones., pp.

100, 2018, doi: 1 Desember 2013.

Setiyawan, Pengukuran Antropometri, J. Chem.

Inf. Model., vol. 53, no. 9, pp. 1689 1699, 2017.

P. D. Igiany, Faktor Yang Mempengaruhi Pasien

Post Op Fraktur Untuk Melakukan Range of Motion

(Rom), J. Manaj. Inf. dan Adm. Kesehat., vol. 1, no.

, 2019, doi: 10.32585/jmiak.v1i02.160.

A. Muzakky, A. Nurhadi, A. Nurdiansyah, and G.

Wicaksana, Perancangan Sistem Deteksi Banjir

Berbasis IoT, Conf. Innov. Appl. Sci. Technol.

(CIASTECH 2018), no. September, pp. 660 667,

K. Kuswardani, S. Amanati, and Z. Abidin,

Pengaruh Terapi Latihan terhadap Post ORIF

Fraktur Mal Union Tibia Plateu dengan Pemasangan

Plate and Screw, J. Fisioter. dan Rehabil., vol. 1, no.

, pp. 1 8, 2017, doi: 10.33660/jfrwhs.v1i1.3.

M. Munir, M. I. Mahali, S. A. Dewanto, B.

Wulandari, and N. Hasanah, Pengembangan Smart

Traffic Light berbasis IoT dengan Mobile Backend as

a Service sebagai wujud Smart City bidang

transportasi, Elektron. dan Inform., pp. 1 15, 2016.

Y. E. D. Lestari, Pengaruh Rom Exercise Dini Pada

Pasien Post Operasi Fraktur Ekstremitas Bawah

(Fraktur Femur Dan Fraktur Cruris) Terhadap Lama

Hari Rawat Di Ruang Bedah Rsud Gambiran Kota

Kediri, J. Ilmu Kesehat., vol. 3, no. 1, p. 34, 2017,

doi: 10.32831/jik.v3i1.43.

G. B. P. Candra Eko Sakti; Primananda,

Rakhmadhany,

Implementasi Antarmuka

Komunikasi Berbasis Long Range Pada Iot

Middleware Untuk Mendukung Network

Interoperability, J. Pengemb. Teknol. Inf. dan Ilmu

Komput., vol. 4, no. Vol 4 No 1 (2020), pp. 65 73,

Y. Effendi, Rancangan Aplikasi Game Edukasi

Berbasis Mobile Menggunakan App Inventor, J.

Intra-Tech, vol. 2, no. 1, pp. 39 48, 2018.

A. Mujadin and D. Astharini, Uji Kinerja Modul

Pelatihan Motor Penunjang Mata Kuliah

Mekatronika, J. Al-AZHAR Indones. SERI SAINS

DAN Teknol., vol. 3, no. 3, p. 127, 2017, doi:

36722/sst.v3i3.217.

L. Halim, Perancangan dan Implementasi Sistem

Charging & Monitoring Baterai Lithium, pp. 2 26,




DOI: http://dx.doi.org/10.26623/elektrika.v14i1.4078

Refbacks

  • There are currently no refbacks.


Office: Electrical Engineering Lecturer Room, 7th Floor of Menara USM Building, Universitas Semarang, Jalan Soekarno - Hatta, Tlogosari, Semarang - Central Java Tel:(024) 6702757 Fax: (024) 6702272, Email: elektrika@usm.ac.id

View My Stats

Creative Commons License
This work is licensed under a  Creative Commons Attribution 4.0 International License.