Pendampingan Pelaksanaan Pekerjaan Pondasi Beton Sumuran dengan Metode Pengeboran Semi-Mekanik Di Kelurahan Katonsari Kecamatan Demak Kabupaten Demak 26 15
DOI:
https://doi.org/10.26623/kolaboratif.v4i2.14306Keywords:
Community Service, Drilled Shaft Foundations, Semi-Mechanical Drilling, Quality Control, Occupational Health and SafetyAbstract
This community service activity aims to improve the technical and managerial competencies of construction workers in implementing drilled shaft (bored pile) foundations using a semi-mechanical drilling method. The activity was conducted at the BULOG warehouse construction project in Demak Regency, involving 30 workers from PT. Mitra Wardhana. The methods employed included training, demonstrations, direct on-site assistance, and evaluation through pre-test and post-test. The materials delivered covered the stages of drilled shaft construction, semi-mechanical drilling techniques, quality control, and the implementation of occupational health and safety (OHS). The results indicated an average increase of 29.7% in participants’ understanding, demonstrating the effectiveness of practice-based mentoring in enhancing workforce competence. In addition, the activity produced outputs in the form of Standard Operating Procedures (SOP) and technical documentation as sustainable work guidelines. Increased awareness of OHS was also observed through improved work behavior that is more disciplined and safety-oriented. Overall, this activity successfully addressed the partner’s problems and contributed to improving the quality of drilled shaft construction in a more effective, safe, and standardized manner.
Downloads
References
Alves, A. M. S., Gonçalves Filho, C., Santos, N. de M., & Souki, G. Q. (2020). Factors influencing occupational accidents: a multidimensional analysis in the electricity sector. Gestão & Produção, 27(2). https://doi.org/10.1590/0104-530x4609-20
Amrita, A., Siswanto, A. B., Salim, M. A., & Fauzi, R. B. (2023). Pengaruh Pelaksanaan K3 Terhadap Kinerja Karyawan Pada Proyek Konstruksi Di Kabupaten Purwodadi. Jurnal Ilmu Manajemen, 231–240. https://doi.org/10.26740/jim.v11n1.p231-240
Cim, S., Bahrun, A., Magribi, L. O. Muh., & Hatani, L. O. Muh. (2020). Productivity analysis and efficiency of concrete casting using mini cranes with a capacity of 200 kg based on appropriate technology. Revista de La Construcción, 19(2), 198–208. https://doi.org/10.7764/rdlc.19.2.198-208
Das, R., Ganguly, A., & Saha, P. (2021). Different Techniques Used for Well Foundation Construction Focused on Pneumatic Cassion Technique: A Review (pp. 3–12). https://doi.org/10.1007/978-981-15-4577-1_1
Dewi, A. A. D. P., Willar, D., Trigunarsyah, B., & Makalew, F. (2022). Competence of Indonesia workforce in facing liberalization. IOP Conference Series: Earth and Environmental Science, 1101(3), 032008. https://doi.org/10.1088/1755-1315/1101/3/032008
Gil, A. J., Mataveli, M., & García Alcaraz, J. L. (2021). Towards an Analysis of the Relationship Between Quality Management and Project Management. In Techniques, Tools and Methodologies Applied to Quality Assurance in Manufacturing (pp. 119–137). Springer International Publishing. https://doi.org/10.1007/978-3-030-69314-5_6
Hadiwijaya, R. (2023). Pengaruh Tingkat Kesadaran Dan Pengawasan Terhadap Kepatuhan Keselamatan Dan Kesehatan Kerja (K3) Di PT Vicor Construction. Cakrawala Repositori IMWI, 6(5), 1893–1903. https://doi.org/10.52851/cakrawala.v6i5.509
Haegemans, T., Snoeck, M., & Lemahieu, W. (2019). A theoretical framework to improve the quality of manually acquired data. Information & Management, 56(1), 1–14. https://doi.org/10.1016/j.im.2018.05.014
Hedaputri, D. S., Indradi, R., & Illahika, A. P. (2021). Kajian Literatur: Hubungan Tingkat Pengetahuan Kesehatan dan Keselamatan Kerja (K3) dengan Kejadian Kecelakaan Kerja. CoMPHI Journal: Community Medicine and Public Health of Indonesia Journal, 2(1), 185–193. https://doi.org/10.37148/comphijournal.v2i1.27
Jie Liu. (2025). Effective Strategies for Quality Supervision and Management of Housing Construction Projects. 2025 International Conference on Architecture, Civil Engineering, and Landscaping (ICACEL 2025). https://doi.org/10.25236/icacel.2025.170
Laksono, T. D., & Wiyanti, D. S. (2023). Job safety analysis (jsa) of pile foundation work at purbalingga multipurpose building construction project. International Journal of Engineering Technologies and Management Research, 10(3). https://doi.org/10.29121/ijetmr.v10.i3.2023.1292
Li, H., Liu, S., & Chang, H. (2020). Experimental research on the influence of working parameters on the drilling efficiency. Tunnelling and Underground Space Technology, 95, 103174. https://doi.org/10.1016/j.tust.2019.103174
Manoharan, K., Dissanayake, P., Pathirana, C., Deegahawature, D., & Silva, R. (2024). Evaluating the efficiency and productivity of general workers in structural work practices of building construction through work-based training applications. International Journal of Construction Management, 24(3), 339–350. https://doi.org/10.1080/15623599.2022.2156841
Nkole, A. (2024). Design and fabrication of a semi-automated plastering machine. Busitema University.
Panchal, J. P., McNamara, A. M., & Goodey, R. J. (2020). Sheet pile groups as an alternative foundation solution to cast-in-situ concrete piles. International Journal of Physical Modelling in Geotechnics, 20(2), 83–96. https://doi.org/10.1680/jphmg.18.00053
Salih Mohamed Harun. (2024). Individual Workforce Capacity-Building. International Journal of Innovative Research and Development. https://doi.org/10.24940/ijird/2024/v13/i4/APR24032
Shakhmov, Zh. A., Zhumagulova, A. A., Yerzatova, M. Y., & Tokanov, D. T. (2023). Comparative analysis of bored piles according to their geometrical variations. Bulletin D. Serikbayev of EKTU, (1), 436–444. https://doi.org/10.51885/1561-4212_2023_4_436
Sin, C. H., Nee, T. S., & Yong, L. Y. (2024). Quality management challenges in construction projects: investigating factors, measures, and the role of material quality control. Planning Malaysia, 22. https://doi.org/10.21837/pm.v22i32.1493
Spyridis, P., Walter, L., Biermann, D., & Dreier, J. (2022). Effects of steel fibres on hammer drilling in concrete for the installation of post-installed anchors. Journal of Building Engineering, 52, 104395. https://doi.org/10.1016/j.jobe.2022.104395
Stoll, S. C., Henning, S. R., Bagley, A. D., & Wieghaus, K. T. (2022). Foundation Damage Assessments and Structural Repairs. Forensic Engineering 2022, 166–174. https://doi.org/10.1061/9780784484548.018
Sukardi, W., Salim, U., Rofiq, A., & Hussein, A. (2020). Effects of Project Foundation, Support, Personnel, and Process on Project Success with Process Flexibility as Moderating Variable. Proceedings of the International Conference on Engineering and Information
Technology for Sustainable Industry, 1–8. https://doi.org/10.1145/3429789.3429816
Wesli, W., Ersa, N. S., & Widari, L. A. (2022). Pengembangan kapasitas kelompok kerja tukang bangunan dalam membangun rumah sederhana tahan gempa di Kecamatan Muara Satu, Kota Lhokseumawe (Builder capacity development for build a simple earthquake resistant house in Muara Satu Sub-District, Lhokseumawe City). Buletin Pengabdian Bulletin of Community Services, 2(2), 35–41. https://doi.org/10.24815/bulpengmas.v2i2.25457
Zharikov, I., Laketich, A., & Laketich, N. (2020). Impact of concrete quality works on concrete strength of monolithic constructions. Construction Materials and Products, 51–58. https://doi.org/10.34031/2618-7183-2018-1-1-51-58
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Dhamang Budi Cahyono, Kukuh Wisnuaji Widiatmoko, Faizal Mahmud, Bagus Acung Billahi
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
