The Effect of Curing Methods on The Mechanical Properties of Concrete for Effective Field Work 23 13
DOI:
https://doi.org/10.26623/teknika.v21i2.13793Keywords:
method, curing, concreteAbstract
Concrete is a primary construction material whose mechanical properties are significantly affected by the curing method during the cement hydration process. This study aims to analyze the effect of various curing methods on the mechanical properties of concrete and determine the most effective and realistic method for field application. The study was conducted experimentally using 30 MPa normal concrete with cylindrical specimens with a diameter of 150 mm and a height of 300 mm. Variations in curing methods included immersion, watering, wet sacks, plastic sheeting, and curing compound. Compressive strength, splitting tensile strength, and elastic modulus tests were conducted at 28 days. The results showed that the immersion method produced the highest mechanical property values, followed by wet sacks and plastic sheeting, while watering and curing compound showed lower results. It was concluded that the wet sack method is the most effective curing alternative for field conditions. This study contributes practical recommendations in the selection of concrete curing methods.
References
Agustina, H.A. 2023. Pengaruh Metode Rawatan Beton Terhadap Kuat Tekan, Modulus Elastisitas Dan Kuat Lentur Beton. Tugas Akhir. (Tidak Diterbitkan). Universitas Islam Indonesia. Yogyakarta.
American Society for Testing and Materials. 1961. ASTM C-469 Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. Philadelphia.
Arief Syahar A P. 2015. Pengaruh Cara Perawatan Terhadap Kuat Lentur Beton. Proyek Akhir. (Tidak Diterbitkan). Universitas Negeri Yogyakarta. Yogyakarta
Evert, E. dan Kushartomo, W. 2024. Analisis Perbandingan Perawatan Beton Terhadap Mutu Beton. JMTS: Jurnal Mitra Teknik Sipil. Jakarta
H. Mallisa. 2008. Pengaruh Lamanya Pengadukan Terhadap Nilai Slump Dan Kandungan Udara Campuran Beton. Jurnal SMARTek. Palu
Mulyati, M. dan Arkis, Z. 2020. Pengaruh Metode Perawatan Beton Terhadap Kuat Tekan Beton Normal. Jurnal Teknik Sipil ITP. Padang
Sumajouw, M.D.J., Dapas, S.O. dan Windah, R.S. 2014. Pengujian Kuat Tekan Beton Mutu Tinggi. Jurnal Ilmiah Media Engineering. Manado
Supriani, F. dan Islam, M. 2019. Pengaruh Metode Perlakuan Dalam Perawatan Beton Terhadap Kuat Tekan Dan Durabilitas Beton. Inersia, Jurnal Teknik Sipil. Bengkulu
Mulyono, T. (2006). Teknologi Beton. Penerbit Andi.
Agustina, R., & Musthofa, M. (2023). Pengaruh jenis semen dan lama perawatan yang berbeda terhadap kuat tekan beton normal. Jurnal Handasah: Jurnal Ilmiah Teknik Sipil, Fakultas Teknik Universitas Islam Al-Azhar.
Mujiyati, A. T. M., Hunggurami, E., & Nasjono, J. K. (2022). Pengaruh perawatan water-curing dengan variasi lama perawatan dan tinggi perendaman terhadap kuat tekan beton. Jurnal Teknik Sipil, 11(2), 183–189.
Mulyati, V., Fernando, V., Hunggurami, E., & Sir, T. M. W. (2023). Pengaruh perawatan beton (curing) menggunakan water curing dan membrane curing terhadap kuat tekan beton. Jurnal Teknik Sipil, 12(2), 137–144.
Budi, S., Arianti, S., Amalia, A., & Edistria, E. (2023). Pengaruh curing di lapangan terhadap hasil uji dengan alat hammer test. Prosiding Seminar Nasional Teknik Sipil Politeknik Negeri Jakarta, e-ISSN 2715-5668.
Sariman, S., Setiawan, A., & Ridwan. (2023). Analisis waktu curing dan bentuk spesimen terhadap kuat tekan beton PCC. Jurnal Ilmiah Ecosystem, 23(1), 102–110.
Haekal, D. F. (2022). Analisis kuat tarik belah dan kuat tekan beton dengan bahan tambah serat potongan limbah banner. Tugas Akhir, Universitas Islam Indonesia, Yogyakarta.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution 4.0 International License.
