ANALISIS KUAT TEKAN BETON DENGAN AGREGAT PASIR DARI BOYOLALI MENGGUNAKAN BAHAN TAMBAH ABU SEKAM PEMBAKARAN KAYU DAN SERBUK HALUS ARANG BRIKET
DOI:
https://doi.org/10.26623/teknika.v13i2.1314Keywords:
wood burning husk ash, compressive strength, fine briquette charcoal powderAbstract
Concrete research has been carried out, this study utilizes wood burning husk ash and fine powder of briquette charcoal as an added material from the weight of cement and sand used from Boyolali. This study aims to determine the compressive strength of concrete with materials added to wood burning husk ash and fine powder of briquette charcoal. Material variations added wood burning husk ash and briquette charcoal fine powder by 0%, 10%, 20% by weight of cement. This study used 0.5 fas and concrete testing at the age of 7 days, 14 days and 28 days. From the test results the average compressive strength of concrete at the age of 7 days with a material variation of 10% added was 15.05 MPA, and a material variation of 20% added was 13.47 MPA. Concrete at the age of 14 days with a material variation of 10% added is 15.76 MPA, and a material variation of 20% is 13.18 MPA. concrete at 28 days with a material variation of 10% added is 14.32 MPA, and a 20% added material variation is 14.32 MPA.
Keywords; wood burning husk ash, compressive strength, fine briquette charcoal powder
Abstrak
Penelitian beton telah banyak dilakukan, penelitian ini memanfaatkan abu sekam pembakaran kayu dan serbuk halus arang briket sebagai bahan tambah dari berat semen dan pasir yang digunakan dari boyolali. Penelitian ini bertujuan untuk mengetahui kuat tekan beton dengan bahan tambah abu sekam pembakaran kayu dan serbuk halus arang briket. Variasi bahan tambah abu sekam pembakaran kayu dan serbuk halus arang briket sebesar 0%, 10%, 20% dari berat semen. Penelitian ini menggunakan fas 0,5 dan pengujian beton pada umur 7 hari, 14 hari dan 28 hari. Dari hasil pengujian kuat tekan rata-rata beton pada umur 7 hari dengan variasi bahan tambah 10% adalah 15,05 MPA, dan vari asi bahan tambah 20% adalah 13,47 MPA. Beton pada umur 14 hari dengan variasi bahan tambah 10% adalah 15,76 MPA, dan variasi bahan tambah 20% adalah 13,18 MPA. beton pada umur 28 hari dengan variasi bahan tambah 10% adalah 14,32 MPA, dan vari asi bahan tambah 20% adalah 14,32 MPA.
Kata kunci : abu sekam pembakaran kayu, kuat tekan, serbuk halus arang briket
References
Amrulloh, I.F., 2012, Analisis Kuat Tekan Beton dengan Bahan Tambah Serbuk Halus Gelas Serta Analisis Kuat Tekan Beton Dengan Bahan Tambah Serbuk Halus Arang Briket, Jurusan Teknik Sipil, Fakultas Teknik, Universitas Muhammadiyah Surakarta.
Badan Standardisasi Nasional. 2004, Semen Portland, SNI 15-2049-2004, Departemen Pekerjaan Umum. Jakarta.
Departemen Pekerjaan Umum, 1982. Persyaratan Umum Bahan Bangunan di Indonesia, Departemen Pekerjaan Umum, Jakarta.
Haryanto, H. T., 2012, Analisis Kuat Tekan dan Kuat Tarik Belah Beton dengan Bahan Tambah Serbuk Arang Briket dan Berstmittel, Jurusan Teknik Sipil, Fakultas Teknik, Universitas Muhammadiyah Surakarta.
Prasetyo, G.B., 2015, Tinjauan kuat Tekan Beton Geopolimer dengan Fly Ash Sebagai Bahan Pengganti Semen, Jurusan Teknik Sipil,Fakultas Teknik, UniversitasMuhammadiyah Surakarta.
Trinugroho, S dan Rubianto, N., 2011, Kapasitas Tekan dan Tarik Beton Dengan Bahan TambahFiller Abu Ampas Tebu dan Abu Arang Briket Dengan Fas 0.45, JurusanTeknik Sipil, Fakultas Teknik, Universitas Muhammadiyah Surakarta.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution 4.0 International License.