Analisa Rugi-Rugi Daya Dan Jatuh Tegangan Pada Saluran Transmisi 150 kV GI Pati Bay GI Jekulo Menggunakan ETAP 12.6.0

Bayu Andik Anggoro, Sukarno Budi Utomo, Ida Widihastuti

Abstract


In the electric power system, the transmission system is a pathway to transmit electrical energy from the generator to the substation or from the substation to another substation which allows power losses and large voltage drops if the transmission length is relatively far and the overload is very high. affect the reliability of the transmission system. Analysis of power losses and voltage drop on the 150 KV high voltage transmission system at the Pati substation to the Jekulo substation. The analysis was carried out by conducting a survey at the research location then doing manual calculations and calculations using ETAP 12.6.0 software. The research method used was that the researcher collected voltage and current data at 10.00 and 19.00 WIB in one month and the transmission system supporting equipment specifications to be simulated in ETAP 12.6.0 from Pati and Jekulo substations in order to make comparisons between manual calculations and ETAP. 12.6.0.The conclusion of this study is the calculation of power losses manual calculation and simulation of ETAP 12.6.0 has a difference of 2.5% with the value of manual calculation power losses of 685.5 KW and the power losses from The simulation results reached 266.6 KW and the calculation of the presentation of power losses in the transmission line of GI Pati - GI Jekulo reached 6.8% exceeding the service percentage variation limit due to losses according to SPLN No. 72 of 1987 a maximum of 5% at least -10%.


Keywords


Transmission, Losses, Drop voltage

Full Text:

PDF

References


Refrensi dari Buku :

SPLN 72, “Spesifikasi Desain untuk Jaringan Tegangan Menengah (JTM) dan Jaringan Tegangan Rendah (JTR),” Spln 72, p. 15, 1987.

DR.ArtonoArismunandarM.A. Sc. and DR. Susumu Kuwahara, Teknik Tenaga Listrik, no. 0806365412. 2004.

Cekmas Cekdin, “Sistem Tenaga Listrik,” ELTEK, Vol 11 Nomor 01, pp. 1–293, 2013.

M. Ir. Chris Timotius, “Instalasi Tegangan Menengah,” pp. 8–12, 2006.

Refrensi dari jurnal :

S. Hariyadi, “ANALISIS RUGI-RUGI DAYA DAN JATUH TEGANGAN PADA SALURAN TRANSMISI TEGANGAN TINGGI 150 KV PADA GARDU INDUK PALUR – MASARAN Disusun,” Univ. Muhammadiyah Surakarta, no. 1–16, 2017.

S. B. Utomo and M. Haddin, “Analisis Perhitungan Rugi-Rugi Daya pada Saluran Transmisi Tegangan Tinggi 150 kV Gardu Induk Tambak Lorok – Bawen,” pp. 234–243, 2019.

O. Handayani, T. Darmana, and C. Widyastuti, “Analisis Perbandingan Efisiensi Penyaluran Listrik Antara Penghantar ACSR dan ACCC pada Sistem Transmisi 150kV,” Energi & Kelistrikan, vol. 11, no. 1, pp. 37–45, 2019.

B. A. B. Ii, “Mohamad Tresna Wikarsa, FT UI, 2010.,” Skripsi, vol. 14, no. 1, pp. 3–26, 2010.

B. A. B. Iii, “Bab iii saluran transmisi,” pp. 1–24.

I. Pujriani, “BAB II Tinjauan Pustaka Kebisingan,” J. FKM UI, pp. 11–29, 2008.

P. K. Tengah, “No Title,” pp. 1–21.

B. A. B. Ii and L. Teori, “[1] 2.,” pp. 10–68, 2016.




DOI: http://dx.doi.org/10.26623/elektrika.v12i2.2828

Refbacks

  • There are currently no refbacks.


Office: Ruang Dekanat, Gedung A Fakultas Teknik, Universitas Semarang, Jalan Soekarno - Hatta, Tlogosari, Semarang - Jawa Tengah Telp:(024) 6702757 Fax: (024) 6702272, Email : elektrika@usm.ac.id

View My Stats

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License