RANCANG BANGUN TACHOMETER DIGITAL BERBASIS ARDUINO DILENGKAPI CHARGING DAN MODE PENYIMPAN DATA

Imam Tri Harsoyo, Andi Kurniawan Nugroho, Nuriman Nuriman

Abstract


A good and feasible centrifuge is needed in the world of health, therefore a digital tachometer is needed to calibrate a centrifuge. Digital tachometer is a measuring instrument used to measure the rotation speed of a motor. This tachometer will be tested to function by being compared to using Digital Laser Photo Tachometer. This tachometer will display the number of rotations per minute of a motor according to the speed setting on the centrifuge using the output of this E18-D80NK sensor which will later be processed by the Arduino Nano. As for this feature charger and data storage mode, so that user can save the data of measurement results on SD Card, and beside that user can also be a way of charging when after usage or before usage. At testing the tool used point settings 1000, 2000, 3000, 4000, 5000, and 12000 RPM. Based on the measurement results of centrifuge using tachometer module and comparison tachometer have average percentage of error varying at each setting point. The smallest error 0.8% at the setting Point 3000 RPM, while the largest error 4.9% at the setting point 1000 RPM. The Tacometer error value on this Centrifuge measurement is still within the tolerance limit of ± 10%

Keywords


Arduino Nano, E18-D80NK Sensor, LCD, RPM, Tachometer

Full Text:

PDF

References


Adillah, R. 2017. Tachometer Berbasis Mikrokontroler Dilengkapi dengan Mode Pengukuran RPM dan KM. Surabaya.

Cheng, C. H., Schmitz, T. L., & Scott Duncan, G. (2007). Rotating tool point frequency response prediction using RCSA. Machining Science and Technology, 11(3), 433-446.

Gunawan, A. 2016. Algoritma Pendeteksian Obstacle dan Furniture Menggunakan Metode E Triangulasi dan Scanning Pada Robot Berkaki Enam yang Diterapkan pada Kontes Robot Pemadam Api Idonesia. Salatiga.

Hamiddin, I. 2018. SAKLAR OTOMATIS SISTEM KONTROL TERPADU MENGGUNAKAN ARDUINO NANO. Yogyakarta.

Ismail, R. 2015. Centrifuge: Alat Separasi Pada Sampel Fase Suspensi Dalam Kegiatan Praktikum Dan Penelitian. Bogor.

Menteri Kesehatan Republik Indonsia. 2015. Peraturan Menteri Kesehatan Republik Indonesia Nomor 54 Tahun 2015 Tentang Pengujian dan Kalibrasi Alat Kesehatan. Jakarta.

Nikmah, S, M. 2016. Tachometer Non Contact Berbasis Arduino. Surabaya.

Pratama, A, R. 2017. Alat Kalibrasi Centrifuge Non Contact Berbasis Microcontroller Atmega 8. Yogyakarta.

Rana, M. M., Sahabuddin, M., & Mondol, S. 2016. Design and Implementation of a Digital Tachometer. memory, 2, 3.

Restivo, M. T., de Almeida, F. G., Chouzal, M. D. F., Mendes, J. G., & Lopes, A. M. 2011. Handbook of laboratory measurements and instrumentation. International Frequency Sensor Association.

User s Guide Extech Instruments Company. 2011. Model RPM 10 Laser Photo/ Contact Tachometer with IR Thermometer. Boston.




DOI: http://dx.doi.org/10.26623/elektrika.v11i2.1692

Refbacks

  • There are currently no refbacks.


Office: Electrical Engineering Lecturer Room, 7th Floor of Menara USM Building, Universitas Semarang, Jalan Soekarno - Hatta, Tlogosari, Semarang - Central Java Tel:(024) 6702757 Fax: (024) 6702272, Email: elektrika@usm.ac.id

View My Stats

Creative Commons License
This work is licensed under a  Creative Commons Attribution 4.0 International License.